Monday, May 12, 2014

Make Our Grass Evergreen

HAVE lush lawns and manicured unnecessary splurge . On the other hand , it may be obtained by reference books, magazines , the internet and even landscaping experts who were willing to disclose how protect it.

Once known basic care , you can do it yourself . In fact, the wrong style, neighbors and friends who came asking for tips and inspiration laid up a beautiful page .

Trim and cut grass disclose the most basic things well kept yard . However, should the proper technique , especially if it involves your first experience trim and cut the grass.

If this is the first time you do it , make sure you hit the swinging scythe to the grass roots . In addition to removing dead grass , its main purpose is to allow new and more green grass grows quickly .

Make sure the grass is scratched and not even the whole loosened your lawn cut and trim . This is believed to help fertilize the soil thus promoting the growth of new grass more lush .

The second time to cut the grass , make sure of sickle not swung too deep. When the weather is warm and sunny , make sure not to do layahan crescent of land that resulted grass turns brown.

As trees and flowers also need anointing page so as not to wilt and dry . Prior to that , it is important for you to identify the species of grass and soil type to predict the amount and rate of anointing needed . Do not water the yard after a rain because it makes the soil is saturated and eventually the grass will die .

Second best is watering lawn in the early morning or sunset shortly . When this happens the condensation of water thus helping to reach deep into the soil .

Fertilizer key factor in soil fertility. Therefore , it is important for you to identify the type of soil . If unsure , take soil samples to a specialist landscape and nursery center so that they can recommend the appropriate type of fertilizer for your yard .

There are two types to choose from namely chemical fertilizers or organic. Whatever your choice , make sure that the instructions for use as the first step down followed fertilizers can damage the page.

One thing that not everyone knows the land and the grass roots need air to breathe , especially for dense soil types . To test the density of the soil , pour a little water into the soil and wait a few minutes to absorb ability of water. Ground water means have failed to diffuse carbon dioxide that accumulates in it .

The easiest way to deal with the fine holes punched by a certain distance from the earth. The idea that oxygen and water can penetrate to the roots . The hole should be small -porous and can not be seen with the naked eye.

Type of ornamental grasses :

Cow grass
Cow grass scientific name Axonopus compressus ( some say Paspalum conjugatum ) is highly recommended grown in home gardens . Easy maintenance due to not need much fertilizer and pest and disease resistant .

Long delayed unless given more fertilizer . Short roots makes it difficult to live in the dry weather .

Bermuda grass
Cynadon dactylon is a hybrid of "marriage " between Cynodon dactylon and Cynodon transuaalensis . This grass thrives in warm sunny weather is also able to receive a lot of rain .

In the unpredictable weather , the leaves grow thin and long . Ideal for open spaces such as golf courses, football and playground space.

Serangoon grass

Digitaria didactyla usually live in tropical and subtropical areas . Distinction is that it is resistant to flooding (though in the short term ) and able to withstand drought to shrink and drop leaves.

Care not picky as long slow and not dependent on the fertilizer . However , his young green color gives it less appealing to be grass sites .

Zoysia grass

Zoysia Zoysia japanica matrella or sometimes , Zoysia tenufolia and some hybrid consists of Zoysia Zoysia japanica and tenufolia fall under this family . Young green grass Serangoon same but thinner leaves .

Grow vertically rather than horizontally , thus making cutting more than doubled . Beautiful when closely defended but high maintenance cost as it requires a lot of fertilizer .

Silica content more than regular grass makes it hard . Because of that it is appropriate to decorate a golf ball and golf despite 'defences' dubious penalty box .

Matrella and japonica matrella distinguished by red flowers .

Tips

Growing Grass

NO difference with tree planting grass because both have to do with passion, reason and necessity. Normas Confident , turf managers through its website http://www.mynormas.com advise you to first identify the purpose of planting the nurseries before choosing the type of grass ;

Uses. Is the purpose of grass planted solely embellish the home page , decorate children's park , for recreation purposes in the form of a golf ball , golf and so on . Others use the other types of grass .

Level of care involves your willingness to preserve and conserve them. For example, how often is provided for cutting and fertilize it , how many hours a day you remove weeds and plant new grass and so on .

Growing areas - whether it be planted near buildings or trees page ? Some types of grass require more than six hours a day of sunlight.

Expenses for care of fertilizers and pesticides .

Thursday, December 26, 2013

[TECH] Home garden technology leaflet 2

Home garden technology leaflet 2: Planning improvements to the home garden

Every home garden can be improved to fulfill your family's needs better. A well-planned and well-tended home garden can provide nutritious food, income, medicines, seeds and seedlings for the family's other land areas. At the same time, it will be a beautiful place to live in. To improve your home garden, you need to know four things:
    - what your home garden produces now;
    - what you would like your home garden to produce in future;
    - how you can improve your home garden;
    - what inputs are needed.
STEP 1: KNOW YOUR HOME GARDEN

Make sure you have a good idea of the structure and main functions of your home garden. A map of your home garden will help you and others assisting you to visualize exactly what your home garden is and what it can do (making a home garden map is described in Home Garden Technology Leaflet 1).

STEP 2: SET OBJECTIVES

Make a list of the main things you want your home garden to produce. You should also identify the major constraints you need to overcome, such as wild pigs, poor soil or sloping land. Some examples of objectives are listed in Table I. Keep your list simple at first; you can add to it later.

TABLE 1
Examples of home garden objectives
Provide daily nutritional needs for the family
Provide more income
Increase food production
Diversity food production
Make the garden easy to care for
Provide a place for farm animals
Keep out pests
Reduce weeding
Provide a nursery for estate crop's
Make use of all area available

Planning improvements and changes to your home garden requires some thinking. Deciding what you want to do depends on your situation, such as soil type, sloping land, and how much time and money you have available. Your wife or husband and maybe a friend should participate in the planning. Also ask your agricultural extension agent for technical advice to help you make the right decisions.

STEP 3: SELECT TECHNOLOGY OPTIONS

Choose those technology options in Table 2 that meet your needs and situation. Note that you can choose either a single technology option or a combination of several options, depending on the type of land and resources that you have.

Using the home garden map, identify where the technology options should be located. The technology options sometimes overlap, for example Living fences (Home Garden Technology Leaflet 10) are useful around an Intensive Vegetable Square (Home Garden Technology Leaflet 12). Walk around the home garden with the map and try to imagine how the technology options you have selected will fit together into a system.

TABLE 2

Technology options in the Home Garden Technology Leaflets

Leaflet number
Technology option
Leaflet number
Technology option
3Growing plants for daily nutrition10Living fences
4Planting crops for a continuous food supply11Multiple cropping
5Soil improvement12Intensive vegetable square
6Use of sloping land13Multilayer cropping
7Cover cropping14Growing fruit- and nut- trees
8Using wetland15Home garden nursery
9Safe and effective crop protection

Each of these technology options are briefly described in the respective leaflets, and you can probably recognize many of them in the home gardens and farmed land of your village. For more detailed information and advice, ask your agricultural extension agent or a neighbour who has a well-developed home garden.
Use the map as a vision of the garden you want to create. Everyone who works in the garden, including advisers, should refer to the map. In this way it is easier to ensure that each step in the completion of the garden is thought about, discussed and understood.

Figure 1 Example of home garden map with different technology options

[TECH] Home garden technology leaflets (Part 1)

Improve family nutrition by developing your home garden

What is the purpose of these leaflets?
The purpose of the leaflets is to help farmers improve family food supplies and nutrition year round through home gardening.

This package contains 15 technology leaflets with ideas and technical recommendations on how to improve family food supplies and nutrition through home gardening.

Each leaflet provides information on a technology option or on the type of improvements farmers can make in their home garden to increase food production, to provide a greater diversity of plant foods and to add nutritional value to the family's daily diet.

Who are the leaflets for?
The leaflets are intended for use by agricultural extension workers and farmers who are able to read. The leaflets should be used in situations where a farm family wishes to:
    - set up a new home garden for family food production and income;
    - develop or expand an existing home garden to improve food production and diversify crops;
    - improve family food supplies and nutrition.
How should the leaflets be used?
The leaflets provide basic information, ideas and suggestions on different technology options or home garden improvements. They can be used either singly or in combination with one another, depending on the type of improvements farmers wish to make. Agricultural extension workers should assist farmers in selecting the technology they want to adopt in accordance with the kind, variety and quantity of home garden crops they want to grow.

Farm families should always contact their agricultural extension worker if they need help or advice with technical farming issues such as crop management, pesticide use, water management and many other topics.

Home garden technology leaflet 1: The home garden

WHAT IS A HOME GARDEN?
This leaflet aims to help you understand the many different things that make up a typical home garden. When you know how the home garden is made up (its structure) and what it does and produces (its functions or outputs) you will be able to improve the home garden's output to suit your own family's needs.

The home garden is an integrated system which comprises different things in its small area: the family house, a living/playing area, a kitchen garden, a mixed garden, a fish pond, stores, an animal house and, of course, people. It produces a variety of foods and agricultural products, including staple crops, vegetables, fruits, medicinal plants, livestock and fish both for home consumption or use and for income.

WHAT ARE THE BASIC STRUCTURE AND FUNCTIONS OF THE HOME GARDEN?
The home garden compound has different areas and functions. There are three main areas within the typical home garden. Each of these provides different things for the family that lives there. The areas are shown in Figure 1, divided only by dotted lines because, in reality, the functions of the areas overlap the imaginary dotted boundaries.
Figure 1 Basic home garden map
The social area
Location: in front of the house, incorporating the clean-swept courtyard.
Use: mostly a place for social activities - meeting and talking, children's play, display gardens and also for drying grain.

The utility area
Location: around the house.
Use: mostly a place for physical objects or activities - living, washing, storage, animal house and latrine but also kitchen garden.
The production area Location: the rear part of the garden.
Use: mostly a place for growing food and cash crops and raising animals (e.g. fish, chickens, pigs).

WHAT IS THE SIGNIFICANCE OF THE HOME GARDEN AMONG THE FAMILY'S FARMLANDS?

Most families have more than one area of land for farming. Usually a family has a home garden area and a food cropping area near to the village. Together, these areas of land make up the family's farmlands. The family divides its working time and resources between these two areas. Each area of land is used in a different way but, together, the two areas must provide all the family's needs.

The home garden has a special significance because among a family's most important basic needs are food and shelter. If developed well, the home garden can provide:
    - Enough nutritious non-staple foods for all the family year round, including extra food stocks for processing and sale to obtain income and a reserve for special occasions or emergencies (e.g. sometimes a staple food crop is lost in a flood, eaten by pests or reduced because the farmer falls sick and cannot work for some time).
    - Income from the sale of home garden produce. Sales of home garden produce can contribute considerably to a family's income (to buy daily essentials and farming inputs that cannot be produced on the family's farmlands as well as other goods and services).
    - Farm development. The home garden has a plant nursery for growing plantation seedlings, for trying out new farming ideas and crops and for processing and storing seeds for the next planting season.
HOW TO APPRAISE YOUR HOME GARDEN
Before trying to improve your home garden, you have to find out more about it; particularly why it is not producing more food or income or providing inputs for farm development. There are many things to find out because the home garden has different functions, i.e. social, utility and economic functions. You should allow at least one hour for the appraisal.

Step 1: Get the right people to participate
Different people know different things about home gardens. The farmer and the housekeeper are the most important because they know the home garden's history and what the home garden provides for their family. The local agricultural extension agent will be able to help identify plants and to assess the soil and other technical aspects. You may want to ask other people to participate, for example your neighbours, relatives or women's farmer group members.

Step 2: Make a map of the home garden
Make a map of your home garden with the help of the others. One way of doing this is by drawing a "mud map" on the ground with a stick and using stones, leaves and other materials to represent the locations of major features such as trees and areas for food crops, vegetables, herbs, buildings and activities. Mark areas where the land is sloping or swampy. You can use Figure I, Basic home garden map, as a guide.

Step 3: Make a copy and keep it
Copy the map as clearly as possible on to paper with your notes. The map will make it much easier to think about the chances and improvements you want to make.

Figure 2 Discussing and drawing the home garden map

Wednesday, September 25, 2013

[HEALTH] Health hazards of China’s lead-acid battery industry: a review of its market drivers, production processes, and health impacts


Health hazards of China’s lead-acid battery industry: a review of its market drivers, production processes, and health impacts

Environmental Health 2013, 12:61 doi:10.1186/1476-069X-12-61
The electronic version of this article is the complete one and can be found online at:http://www.ehjournal.net/content/12/1/61

Received:15 March 2013
Accepted:30 July 2013
Published:3 August 2013
© 2013 van der Kuijp et al.; licensee BioMed Central Ltd. 
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Despite China’s leaded gasoline phase out in 2000, the continued high rates of lead poisoning found in children’s blood lead levels reflect the need for identifying and controlling other sources of lead pollution. From 2001 to 2007, 24% of children in China studied (N = 94,778) were lead poisoned with levels exceeding 100 μg/L. These levels stand well above the global average of 16%. These trends reveal that China still faces significant public health challenges, with millions of children currently at risk of lead poisoning. The unprecedented growth of China’s lead-acid battery industry from the electric bike, automotive, and photovoltaic industries may explain these persistently high levels, as China remains the world’s leading producer, refiner, and consumer of both lead and lead-acid batteries.
This review assesses the role of China’s rising lead-acid battery industry on lead pollution and exposure. It starts with a synthesis of biological mechanisms of lead exposure followed by an analysis of the key technologies driving the rapid growth of this industry. It then details the four main stages of lead battery production, explaining how each stage results in significant lead loss and pollution. A province-level accounting of each of these industrial operations is also included. Next, reviews of the literature describe how this industry may have contributed to mass lead poisonings throughout China. Finally, the paper closes with a discussion of new policies that address the lead-acid battery industry and identifies policy frameworks to mitigate exposure.
This paper is the first to integrate the market factors, production processes, and health impacts of China’s growing lead-acid battery industry to illustrate its vast public health consequences. The implications of this review are two-fold: it validates calls for a nationwide assessment of lead exposure pathways and levels in China as well as for a more comprehensive investigation into the health impacts of the lead-acid battery industry. The continuous growth of this industry signals the urgent need for effective regulatory action to protect the health and lives of China’s future generations.
Keywords: 
Lead-acid battery; China; Pb; Lead pollution; Lead poisoning; Heavy metals

Background

Despite its well-documented health impacts and efforts to curb its use, lead (Pb) remains a pervasive global neurotoxin capable of causing serious and in some cases irreversible neurological damage. For years, leaded gasoline was the dominant source of human exposure to Pb: it had accounted for 80-90% of airborne Pb in cities where it was used [1]. Since a global phase out of leaded fuels began in the mid-1970s, blood lead levels (BLLs) have plummeted worldwide. In the United States, for example, the prevalence of elevated BLLs (at the time, ≥100 μg/L, 100 micrograms of Pb for each liter of blood) decreased from 77.8% to 4.4% between 1976–1980 and 1988–1991 [2]. Still, 16% of children worldwide are currently estimated to have BLLs above 100 μg/L [3]. Although leaded gasoline in China was phased out on July 1, 2000, approximately 24% of China’s children from 2001–2007 were assessed to have elevated BLLs [4], a noticeable drop from a previous 1995–2003 assessment showing 34% with elevated levels yet still unacceptably high by global averages.
Determining the sources of these high exposure levels will have critical implications for future public health and risk reduction measures. The rapid development of China’s lead-acid battery (LAB) industry may be responsible for these persistently high BLLs. China’s LAB industry is the world’s largest in terms of production and consumption, occupying over 30% of global LAB output[5,6] and using over 67% of China’s total Pb production [7]. Despite these trends and the well-documented Pb problem in China, the current literature lacks aggregate data and assessments of the health hazards of China’s LAB industry. It also does not evaluate the LAB industry’s potential links to numerous Pb poisoning outbreaks. Moreover, no existing body of research has taken the multi-angled approach of integrating the market factors, production processes, and health impacts of the LAB industry. As a result, this paper is the first to integrate these system components to demonstrate the public health implications of this growing industry.
This review assesses the role of China’s rising LAB industry on Pb pollution and exposure. It begins with a synthesis of biological mechanisms of Pb exposure followed by a discussion of the three main new market drivers of the LAB industry’s growth in China: the electric bike market, the automobile market, and photovoltaic systems. It then categorizes the four main industrial processes responsible for Pb pollution from the LAB industry and presents the geographic (province-level) distribution of LAB production activities. Next, a brief literature review reveals potential links between recent mass Pb poisonings and the LAB industry. The paper closes with a discussion of China’s new policies to address the LAB industry and identifies policy frameworks that can mitigate exposure to Pb.

Biological mechanisms and health impacts

The United Nations Environment Programme labels Pb a “potent neurotoxin” and a “nerve poison” that globally threatens the health and intellectual development of millions of children and adults[8]. It is a potentially lethal neurotoxin that affects virtually every organ in the human body, crossing the blood–brain barrier by mimicking calcium ions in order to access the central nervous system. Here, it can inflict brain damage, mental retardation, nervous system disorders, encephalopathy (abnormal brain function), cell function deterioration, and a host of other neurological disorders [9,10]. Until the toxin is eradicated, it will continue to impair sensory and cognitive functions [11,12], cause serious kidney and cardiovascular damage [7], and disrupt overall organ development, particularly in children [13]. Gastrointestinal, cardiovascular, reproductive, and nervous systems can all be impacted even if only small doses infiltrate the body[14]. The cumulative and degenerative characteristics of Pb can generate adverse health effects in every individual, particularly in children, who are most susceptible to its long-term effects.
Several physiological and behavioral factors are responsible for this exposure susceptibility. First, the underdeveloped nervous systems of children have not yet acquired the detoxification capabilities to offset the effects of Pb. In adults, approximately 99% of absorbed Pb will be excreted naturally within a couple weeks, but in children, only about 30% of absorbed Pb will be eliminated in waste [15]. Under conditions of continued exposure, most of the original Pb will be retained and more will continue to accumulate in the body tissues of children. Second, in addition to weaker Pb detoxification capabilities, children have higher Pb absorption rates than adults, meaning that the more a child is exposed to Pb, the more readily it enters and remains in a child’s body. The oral absorption rate of Pb in the gastrointestinal tract for children ranges between 40% and 50%, whereas adults absorb between 10-15% [8,16]. Moreover, a greater proportion of circulating Pb gains access to the brains of children, especially those under 5 years of age [17]. Third, since children have higher inhalation rates per unit of body mass than adults [18], they remain disproportionately vulnerable to Pb exposure via inhalation pathways. Finally, some behavioral characteristics of young children such as crawling and frequent hand-to-mouth activity will increase rates of exposure to Pb, including contaminated soils and paints.
Numerous studies have indicated that there is no safe threshold for exposure to Pb, i.e., there is no amount too small to induce an adverse biological reaction [19,20]. Based on these findings, as of May 2012 the U.S. Centers for Disease Control and Prevention lowered the reference value for identifying exposed children from 100 μg/L to 50 μg/L [21]. Because of children’s unique susceptibility to Pb absorption, even relatively low levels of blood concentration (≤100 μg/L) can lead to permanent intellectual impairment and organ system failure [22]. Therefore, regulators must identify the primary sources of Pb pollution and work to reduce the risk of Pb exposure in children.

Market drivers of China’s LAB industry

Globally, Pb derives either from primary (mining) or secondary sources (recycling and refining). The vast majority of Pb (~80%) in global commerce is used to produce LABs, and 97% of these batteries are recycled and reprocessed, primarily in developing low-income countries [3]. China is the world’s largest producer, refiner, and consumer of Pb, with over 67% (>1.92 billion kg) of its total Pb usage allocated towards producing LABs [7]. Some estimates reach as high as 70-75%[23,24]. The remaining uses of Pb in China go towards producing glass, household items, lead alloys, cables, paint additives, and anti-corrosion materials.
Due to their relatively low-costs and high power surge capabilities, LABs are used to fuel growing demand for electric bikes (e-bikes) and motor vehicles. Other applications include powering photovoltaic (PV) devices, uninterruptible power supplies, telecommunications technologies, and electric power systems. With the rapid development of each of these industries in China, the production of LABs is poised to increase dramatically, as is the concomitant rise in Pb pollution. Figure 1 depicts this steady growth in China’s LAB production industry from 1998–2011 [25].
thumbnail
Figure 1. China’s yearly growth in lead-acid battery production by kilo-Volt Amp hours. Generated from industrial data collected byChina Metal Bulletin.
Although price fluctuations and environmental regulations alter supply and demand flows, the LAB industry in China shows no signs of decline despite the availability of competing alternatives such as lithium-ion batteries. The China Environment Forum reported that two factors are primarily responsible for the LAB industry’s annual growth rate of 30% in China [26,27]:Figure 2 displays estimates of China’s LAB market distribution for the year 2011 [24].
thumbnail
Figure 2. The market distribution of lead-acid batteries in China in 2011. Adapted from data and statistics compiled by Occupational Knowledge International.
1. Increased global demand for automobiles.
2. Increased utility in domestic technologies such as e-bikes and PV systems.

Electric bike market

Fueled by consumer demand for inexpensive and convenient transportation, China’s e-bike market is the largest in the world. The relatively lower cost of electricity compared with gasoline, as well as the convenience of recharging e-bike batteries with a standard electrical outlet, make e-bikes one of China’s fastest growing modes of transportation. Moreover, many local governments are promoting the use of e-bikes in urban centers due to their zero tail-pipe emissions and ability to cut down on traffic congestion. These factors have contributed to well over 100 million e-bikes purchased and on the road in the past decade [28]. Currently, China is producing approximately 30 million e-bikes per year. Energy consulting firm Pike Research estimates that by 2018, annual e-bike sales in China will surpass 42 million, giving the nation almost 90% of total world market share [29].
Over 95% of e-bikes sold in China use rechargeable LAB technology [30]. E-bike batteries are about the same size as a typical car battery, containing 10.3-14.7 kg of Pb that comprises 70% of the battery’s total weight and requires replacement every one to two years, or up to 10,000km[31]. Thus, due to the shorter lifespan and high replacement rate of e-bike batteries, lifecycle Pb loss rates per kilometer for e-bikes significantly exceed those for other vehicles.

Automobile market

As the world’s largest producer and consumer of Pb and automobiles, China’s automotive market continues to expand rapidly. In 2010 alone, China produced over 18.2 million passenger cars, doubling the second largest producer Japan [32]. Production trends will increase greatly over the next few decades to keep pace with China’s expanding vehicle market. By the end of 2011, car ownership in China exceeded 100 million [33] and under simulated growth models, China’s vehicle population would reach 185, 364, and 607 million by 2020, 2030, and 2050, respectively [34]. Long-term data projections from a separate study reveal similar results: 321 million to 391 million cars in China by 2035, and 486 million to 662 million by 2050 [35].
With these stark projections in both car production and consumption, there will be a concomitant increase in LAB production to power these vehicles. Each car battery contains 14 kg of Pb and has components similar to e-bike batteries. However, automobile batteries have a 5× greater lifespan, resulting in less frequent recycling rates and ultimate Pb loss.

Photovoltaic (PV) systems

Under China’s landmark 2005 Renewable Energy Law, the proportion of energy generated by renewables is expected to increase dramatically over the next two decades. To meet these ambitious targets, China’s National People’s Congress has established 5 GW as an official minimum PV target for 2015, with a longer-term target of 20 to 30 GW by 2020 [36].
By the end of 2011, China had already installed a cumulative PV capacity of 3.3 GW, representing a more than 400% increase from the prior year [37]. PV systems require energy storage systems (batteries) to improve reliability and avoid fluctuations in power supply. 75% of these PV systems deploy lead-acid batteries, causing an expansion in LAB production and toxic Pb emissions [38]. Rural home-based systems and decentralized power grids in western China will rely on PV systems as a cost-effective power supply. This heavy reliance on LABs is not expected to change in the coming years, as the costs of the primary alternative lithium ion battery currently remain two to four times higher per kWh than LABs [39].
Given that China’s solar installations require 55 kg of battery weight (36 kg of Pb) per kW-year of installed PV capacity [40], the government’s plan to nearly quadruple current capacity in the coming decade reflects how rapidly both the PV and LAB markets are growing. Thus, it is critical to examine how China’s far-reaching targets for PV expansion will impact the LAB market.

Industrial production and pollution processes

Pb can be emitted into the environment during four main production stages: mining/concentrating, smelting/refining, manufacturing, and recycling (secondary refining). In a review accounting for global losses of anthropogenic Pb, China was found to be the leader of Pb emissions in Asia. Furthermore, China ranks highest globally in the first and second production stages as well as in overall Pb waste emissions [41]. A study analyzing specific Pb loss rates during the LAB production process attributed 52.0% of total losses to mining/concentrating, 19.5% to primary refining, 15.0% to manufacturing, and 13.5% to secondary refining [42]. These Pb loss rates account for the Pb that falls outside the LAB production cycle and enters the environment, frequently without prior adequate treatment.
In China, loss rates along the entire industrial supply chain result in more than 30% of the Pb content of a battery lost to the environment [42]. Meanwhile, the organized recovery of used LABs is less than 30% [23], meaning that the remaining 70% is either discarded into the environment or collected and processed by informal, unregulated channels. Due to recycling inefficiencies, the latter often results in loss rates of up to 50% of the battery’s Pb content [43]. Understanding these loss rates is crucial for locating and targeting the most harmful production processes that pose the biggest risks to human health.
Figure 3 shows the geographic distribution of China’s Pb concentrating, refining, and battery manufacturing activities in 2010, derived from data presented in [44,45].
thumbnail
Figure 3. Geographic distribution of China’s concentration, refining, and battery production activities. The top six provinces in each production process are listed, accounting for >75% of production in each process. Most mining, concentrating, and refining processes occur in China’s interior. Battery manufacturing tends to occur along the coast. Figure is produced from raw industrial data obtained from China Statistical Yearbooks and provincial Environmental Protection Bureau statistics.

Lead mining and concentrating

Most Pb mining deposits are located in Hunan, Yunnan, Sichuan, Guangdong, Guangxi, Henan, and Anhui provinces as well as key areas in northeast and northwest China [5]. In 2010, over 75% of China’s Pb concentrate output derived from six provinces: Inner Mongolia, Hunan, Guangdong, Sichuan, Guangxi, and Yunnan. Total Pb concentrate production in 2010 was 1.7 billion kg, a 13% increase from the 1.5 billion kg produced in 2008 [46].
The main three lead-bearing minerals galena (lead sulfide), cerrusite (lead carbonate), and anglesite (lead sulfate) are extracted from underground mines. Once the ore is removed, it is treated at a concentrating mill, which removes the waste rock (tailings) from the Pb by crushing the ore into granular pieces. After this process, tailings are either discharged into holding ponds resembling artificial albeit toxic lakes or discarded into the environment. Although most of the Pb is already extracted, tailings still contain residues of Pb and other heavy metals.
The finely crushed ore is diluted with water to form a slurry mixture and then poured into a flotation cell, into which chemicals (e.g. xanthate) are added to separate the waste rock from the metals. The waste rock, or gangue, sinks to the bottom of the flotation cell while the metal particles float to the surface and create Pb concentrate for refining. The gangue is discharged into holding ponds similar to those that collect tailings. This step in the production process produces the most Pb loss, measured by inefficiencies in extracting Pb concentrate from ore. To the extent that holding ponds are well-contained and well-engineered, the impacts of the mining process can be localized to mine workers and surrounding communities. However, poorly-managed tailing and gangue disposal processes can contaminate water and soil and transport pollution to larger populations.

Lead smelting/refining

The six provinces that accounted for over 81% of total refined Pb output in 2010 are Henan, Hunan, Yunnan, Anhui, Guangxi, and Jiangsu provinces. Total refined Pb production in 2010 was 3.8 billion kg, a 19% increase from the 3.2 billion kg produced in 2008 [46].
During this stage, all lead-bearing elements along with sand and limestone are unloaded onto a sinter plant, where super-heated air (about 1,400°C) “roasts” the concentrate, fusing it into brittle material called sinter. Once sufficiently refined, the Pb compound is cooled and alloyed with antimony to increase strength and durability.
During the refining/roasting process, Pb particles not captured in the sinter are released into the air. Unless baghouse filters are installed to collect these pollutants, toxic emissions will result in air pollution. A solid waste byproduct of this Pb purifying process, slag is a dense substance that is more toxic than gangue and must be secured and monitored closely to avoid human exposure. The substance is often discarded into landfills or the environment, as it serves little industrial purpose.

Lead battery manufacturing: oxide and grid processing, plate processing, and battery assembly

Based on total economic output and battery production capacity for 2010, about 75% of LAB production is supplied by six provinces: Jiangsu, Zhejiang, Guangdong, Hebei, Jiangxi, and Shandong. Zhejiang and Guangdong were also sites of recent mass Pb poisonings of children, resulting in the closure of over 300 battery manufacturers in May 2011. Specific regional hubs of LAB manufacturing are concentrated in the Changxing region of Zhejiang, the Baoding region of Hebei, the Pearl River delta area of Guangdong, the Quanzhou region of Fujian, the Jiyuan region of Henan, the Subei region of Jiangsu, and the Jiaodong region of Shandong [5]. Total consumption of Pb in China has increased by an average of 20% per year from 1999 to 2009 and is estimated to be about 3.86 billion kg in 2009 [46].
Flooded LAB manufacturing first requires making lead oxide paste from the refined Pb by adding water, acid, and a host of other chemicals. Meanwhile, grids are cast from lead alloy and molten lead, which are then combined with the paste. This process prepares lead plates for assembly into batteries. The final procedures involve hydrosetting, enveloping the plates with porous membranes, and assembling the final product.
A LAB contains an anode and cathode made from Pb, components that are bridged partially by a solution of sulfuric acid. When energy is produced, chemical reactions create toxic lead sulfate. Pb is the primary component (by weight), constituting 60-70% of the battery’s mass.
Although Pb loss rates due to manufacturing remain lower than the mining and smelting stages, locations near population centers can cause high levels of Pb exposure. LAB manufacturing enterprises often take advantage of lax regulatory enforcement by moving into poorer, rural communities. Consequently, local residents are directly exposed to the Pb exhaust produced during the casting process that escapes into the atmosphere. Another major source of Pb exposure is from lead oxide that escapes from the paste mixing machine, which dries and becomes airborne. In all major stages of manufacturing, Pb exhaust may be released as air pollution or waste mixtures may be discharged into soil and waterways.

Lead battery recycling

The top manufacturers of secondary LABs are located in Henan, Jiangsu, and Hubei provinces [5]. Pb that is not discarded as waste into landfills or the environment is often recycled by unregulated small-scale recycling enterprises that can operate almost anywhere. Therefore, assessing the geographic distribution of secondary LAB production remains exceedingly difficult. In 2009, total secondary Pb production accounted for 35% of total refined Pb production (1.3 billion kg) in China, compared with 22% in 2005, and is expected to approach 50% of total refined Pb output by 2015[46]. Consequently, most Pb will still derive from more inefficient and polluting primary production processes. Despite the cost-effectiveness of recycling Pb, the process is not without its environmental hazards.
LAB recycling is a relatively simple process. After the battery is crushed into small pieces and washed, Pb compounds are manually or mechanically detached from the plastic and sulfuric acid solution. The Pb is melted and then sent to LAB manufacturing facilities for reprocessing, while the acid is neutralized by an alkaline solution or diluted with water.
In addition to the emissions produced by remanufacturing and reprocessing, LAB recycling creates Pb fumes when the spent battery is heated and melted. These fugitive emissions then escape into the atmosphere and eventually settle on soil, which results in widespread persistent contamination. The wastewater produced during the battery washing process can contain a host of heavy metals. At large-scale enterprises, this substance may be sent to wastewater treatment facilities; however, most small-scale recyclers, accounting for over 50% of total LAB recovery, often discharge the toxic wastewater directly into the environment, contaminating local water sources [5].

Links between lead poisoning and the LAB industry

China faces a public health and social stability challenge with regard to Pb poisoning, especially in children. Scores of mass Pb poisoning incidents involving children have directly fueled large-scale protests, resulting in factory damage and violent riots. A comprehensive review of children’s blood lead levels in China demonstrated that from 1995 to 2003, the mean BLL of children was 92.9 μg/L, and that 34% of the subjects had BLLs higher than 100 μg/L. This level stands multiple times higher than the mean found in developed countries (30 μg/L) [47]. A similar review conducted by the same authors found that from 2001 to 2007, the mean BLL of the children studied (N = 94,778) was 80.7 μg/L, and that 24% (24,065 children) had levels exceeding 100 μg/L [4]. China’s child population (<14 years old) is 260 million [48]. If almost a quarter of those children (65 million) are overexposed to Pb, then millions could face the risk of lifelong developmental and neurological disorders.
The high rates of Pb poisoning found in children’s BLLs continue to reflect the need for identifying and controlling other sources of Pb pollution besides leaded gasoline. From 2009 to 2011 high-profile Pb poisoning incidents in several provinces of China highlighted the impacts on more than 4,000 children, with numerous studies documenting high BLLs in working populations within Pb smelter and mining areas as well as LAB factories [7]. Furthermore, Chinese children living in industrial zones have significantly higher average BLLs than those in urban and suburban areas. The Pb in these industrial areas largely originates from Pb smelting, Pb battery production, and other Pb-related industrial operations [4].
A major review of Pb pollution and poisoning cases integrated Pb exposure data from 618 papers (1990–2005), covering 23 of the 31 administrative regions of China [49]. The review focused on LAB factories and Pb smelters, underscoring the prominent role the LAB industry plays in Pb exposure. The vast majority of the studies reported from the industrial areas of coastal provinces in eastern China: Fujian, Zhejiang, Jiangsu, Shandong, Guangdong, and Shanghai municipality. This geographical concentration was primarily due to the large number of Pb-producing facilities in these areas. The study concluded that from 2003–2005, the Pb poisoning rate for occupationally-exposed LAB workers in China was 36.8%, down from an already elevated rate of 45.0% from 1990–2002.
Another study conducted in May 2011 centered on a large LAB manufacturing factory in Heyuan, Guangdong Province. Several hundred residents had BLLs exceeding 100 μg/L due to exposure to the facility’s waste discharges, suggesting that LAB production at this factory prompted these elevated BLLs to occur among the neighboring populations, rather than just the working population[7]. The study further concluded that BLLs in the clean reference area (1000–2500 meter distance from factory) were significantly lower than those found in the polluted area (0–500 meter distance from factory) and second, that BLLs declined with increasing distance from the factory.
Dozens of studies have linked industrial sources of Pb pollution to Pb’s associated health impacts, including those caused by the LAB industry. A global assessment reveals a marked presence of small-scale LAB recycling operations in the developing world. Surveys in Jamaica, the Philippines, and the Dominican Republic show clear associations between children who live near or even work in LAB recycling facilities and significant elevations in BLLs- levels almost five times higher than those in unexposed children [50]. Unlike China, which participates in all four stages of LAB production, most developing countries rely on recycling exports of used LABs to sell back to the global Pb market. Because children often assist with crushing, washing, and disassembling the LABs, the potential for direct exposure through Pb dust inhalation and ingestion is especially high. In a review of 98 occupational health studies, increased BLLs were discovered among workers and nearby communities across the developing world highlighting this consistent problem, particularly in industrializing countries where regulatory capacity is limited [51].
Mass Pb poisonings triggered by this industry have been reported throughout the world, ranging from Dakar, Senegal to Dong Mai, Vietnam to villages and towns all over China [52]. Nevertheless, because of the sensitive nature of pollution research and monitoring in China, as well as the recent burgeoning of small-scale and backyard LAB enterprises, aggregate data explicitly linking these incidents to industrial Pb sources remain scarce.

Policy responses

On November 21, 2008 the Ministry of Environmental Protection (MEP) formally promulgated “Clean Production Standards for the Lead Battery Industry” (HJ 447–2008) and implemented these in February 2009. These standards mandated application of currently available industrial technology and equipment for the LAB industry. Restrictions were also placed on natural resource usage and pollution emissions.
In response to recent mass Pb poisonings, in March 2011 the MEP along with the National Development and Reform Commission jointly issued an environmental protection special action decree (UNCED [2011] No. 41), with remediation of the LAB industry as its primary goal [44]. The central government tasked all local environmental protection bureaus to immediately conduct a thorough investigation and remediation of all environmental law violators. All LAB enterprises under investigation would be forced to comply with inspections.
As a result of this decree, by July 31, 2011 the investigation of all 1,930 known LAB enterprises (manufacturing, assembly, and recycling) resulted in the complete shutdown of 583 and discontinuation of 405 LAB enterprises. The success in quickly enforcing this special action decree was still riddled with uncertainty, as the MEP acknowledged the numerous problems with regulating smaller-scale unregistered LAB enterprises. Nevertheless, this “storm” of regulatory enforcement reflects the government’s acknowledgement of the severity of Pb pollution and its primary sources.
Also underscoring the hazards of the LAB industry is the State Council’s emphasis on controlling and regulating heavy metal pollutants in its 12th Five-Year Plan to Combat Heavy-Metal Pollution. The Plan singles out the LAB industry as a priority target and calls it “a serious threat to the health of the masses, causing widespread concern for the whole society [53].” Despite this renewed emphasis on tightening regulations on the LAB industry, the economic demand for and increased utility of LABs will contribute to further toxic emissions.
Numerous policy measures can be implemented to reduce the risk of overexposure. Currently, LAB facilities must be located at a minimum distance away from certain residences (Health Protection Distance Standard for Lead Battery Plants (GB 11659–89)) - usually 500 meters. This distance should be standardized to apply to all communities and extended to establish a safe distance from pollution sources, at least 1,000 meters for residences with children. Second, more rigorous enforcement of MEP policies regulating the LAB industry is needed, including minimum production and output standards that essentially ban establishment of small-scale LAB enterprises. Third, consolidation of the LAB industry should be mandated and expedited, as opposed to “gradually moving” existing production enterprises into industrial park zones “where conditions permit” (LAB Industry Access Conditions directive) [54]. This would limit the haphazard distribution of Pb pollution, create a more centralized and efficient industry, and streamline regulatory enforcement. Finally, requiring all LAB enterprises to install advanced air filtration, scrubbing, and water treatment technologies would reduce overall Pb emission and exposure rates.
Because of the diverse sources of Pb exposure in China, there is no one-size-fits-all policy to prevent all Pb poisoning incidents. Pb in residential paint is an important source of exposure. Despite China’s strict residential Pb paint regulations, over 50% of China’s paint has levels exceeding international norms [55,56]. In addition, recent high-profile cases revealed Pb content in children’s toys (paint and vinyl) manufactured in China, highlighting another source of Pb exposure [57]. Exposure at home from lead-glazed ceramics and cooking ware used for food preparation can lead to direct ingestion of the chemical. Pb is also used in the solder that connects water pipes, and when rusted or corroded over time, the toxin can seep into residential drinking water systems. Nevertheless, strong measures targeting the LAB industry would represent a crucial first stage in combating this public health challenge.

Conclusions

The LAB industry is responsible for the vast majority of Pb production in China. LAB production and recycling are currently the most significant sources of Pb exposure in China, with average BLLs in children living near battery factories in developing countries at four times the current level of concern established by the World Health Organization [24]. One must also keep in mind that this health standard of 100 μg/L is currently outdated. According to the U.S. Centers for Disease Control and Prevention, “no level of lead in a child’s blood can be specified as safe” [19]. With no safe threshold of exposure to Pb, the number of children in China at risk of Pb poisoning is in the tens of millions.
This review stresses the need to mitigate the health hazards driven by the rapid growth of the LAB industry. It also demonstrates that despite extensive knowledge of Pb’s health effects, it continues to cause serious public health concerns. Most studies of the LAB industry’s health impacts have focused on a single source of Pb emissions, or at most a proximate village located near a LAB enterprise. China’s LAB industry, however, is spread over many provinces. This review validates calls for a nationwide assessment of Pb exposure pathways and levels in China and for a more comprehensive investigation into the impacts of the LAB industry. Analyses of Pb demand and its key market drivers have shown that LAB production is poised to increase dramatically and will continue to do so for many years. Thus, there is a clear urgency for immediate regulatory action to prevent further poisoning of millions of children in China.

Abbreviations

Pb: Lead; BLLs: Blood lead levels; LAB: Lead-acid battery; E-bike: Electric bike; PV: Photovoltaic; MEP: Ministry of environmental protection.

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

TJV was principal investigator of the project, designed the review, and drafted the original manuscript. LH gathered and integrated data and critically reviewed the paper. CRC performed research and data analyses, contributed to the text, and critically reviewed the paper. All authors read and approved the final version of this manuscript.

Acknowledgements

The authors would like to acknowledge the research support of the U.S. Fulbright Program, Nanjing University School of the Environment, and the National Science Foundation (CBET-1055282).

References

  1. Tsai PL, Hatfield TH: Global benefits from the phaseout of leaded fuel.
    J Environ Health 2011, 74:8-14. PubMed Abstract OpenURL
  2. Centers for Disease Control and Prevention: Update: blood lead levels -- United States, 1991–1994.
    Morb Mortal Wkly Rep 1997, 46:141-146. OpenURL
  3. World Health Organization: Childhood lead poisoning. Geneva, Switzerland: WHO Document Production Services; 2010. OpenURL
  4. He K, Wang S, Zhang J: Blood lead levels of children and its trend in China.
    Sci Total Environ 2009, 407:3986-3993. PubMed Abstract | Publisher Full Text OpenURL
  5. Chen HY, Li AJ, Finlow DE: The lead and lead-acid battery industries during 2002 and 2007 in China.
    J Power Sources 2009, 191:22-27. Publisher Full Text OpenURL
  6. Research in China: China BI portal- China lead-acid battery industry report, 2011–2012.
    OpenURL
  7. Chen L, Xu Z, Liu M, Huang Y, Fan R, Su Y, Hu G, Peng X, Peng X: Lead exposure assessment from study near a lead-acid battery factory in China.
    Sci Total Environ 2012, 429:191-198. PubMed Abstract | Publisher Full Text OpenURL
  8. United Nations Environment Programme, United Nations Children’s Fund: Childhood lead poisoning: information for advocacy and action. New York: UNEP-UNICEF information series; 1997. OpenURL
  9. Sanders T, Liu Y, Buchner V, Tchounwou PB: Neurotoxic effects and biomarkers of lead exposure: a review.
    Rev Environ Health 2009, 24:15-45. PubMed Abstract | PubMed Central Full Text OpenURL
  10. Counter SA, Vahter M, Laurell G, Buchanan LH, Ortega F, Skerfving S: High lead exposure and auditory sensory-neural function in Andean children.
    Environ Health Perspect 1997, 105:522-526. PubMed Abstract | Publisher Full Text |PubMed Central Full Text OpenURL
  11. Counter SA, Buchanan LH, Rosas HD, Ortega F: Neurocognitive effects of chronic lead intoxication in Andean children.
    J Neurol Sci 1998, 160:47-53. PubMed Abstract | Publisher Full Text OpenURL
  12. Banks EC, Ferretti LE, Shucard DW: Effects of low level lead exposure on cognitive function in children: a review of behavioral, neuropsychological and biological evidence.
    Neurotoxicology 1998, 18:237-282. OpenURL
  13. Tong S, von Schirnding YE, Prapamontol T: Environmental lead exposure: a public health problem of global dimensions.
    Bull World Health Organ 2000, 78:1068-1077. PubMed Abstract | PubMed Central Full Text OpenURL
  14. Hsiao CY, Wua HD, Laia JS, Kuo HW: A longitudinal study of the effects of long-term exposure to lead among lead battery factory workers in Taiwan (1989–1999).
    Sci Total Environ 2001, 279:151-158. PubMed Abstract | Publisher Full Text OpenURL
  15. Agency for Toxic Substances and Disease Registry: Toxicological Profile for Lead. Atlanta, GA: Public Health Service; 2007. OpenURL
  16. Liu J, McCauley L, Compher C, Yan C, Shen X, Needleman H, Pinto-Martin J: Regular breakfast and blood lead levels among preschool children.
  17. Lidsky TI, Schneider JS: Lead neurotoxicity in children: basic mechanisms and clinical correlates.
    Brain 2003, 126:5-19. PubMed Abstract | Publisher Full Text OpenURL
  18. Zota AR, Schaider LA, Ettinger AS, Wright RO, Shine JP, Spengler JD: Metal sources and exposures in the homes of young children living near a mining-impacted Superfund site.
    J Expo Sci Environ Epidemiol 2011, 21:495-505. PubMed Abstract | Publisher Full Text |PubMed Central Full Text OpenURL
  19. Centers for Disease Control and Prevention: Preventing lead poisoning in young children. Atlanta, Georgia: CDC; 2005. OpenURL
  20. Pichery C, Bellanger M, Zmirou-Navier D, Glorennec P, Hartemann P, Grandjean P:Childhood lead exposure in France: benefit estimation and partial cost-benefit analysis of lead hazard control.
  21. Centers for Disease Control and Prevention: CDC response to advisory committee on childhood lead poisoning prevention. Atlanta, Georgia: CDC; 2012. OpenURL
  22. Haefliger P, Mathieu-Nolf M, Lociciro S, Ndiaye C, Coly M, Diouf A, Faye A, Sow A, Tempowski J, Pronczuk J, Filipe A, Bertollini R, Neira M: Mass lead intoxication from informal used lead-acid battery recycling in Dakar, Senegal.
    Environ Health Perspect 2009, 117:1535-1540. PubMed Abstract | Publisher Full Text |PubMed Central Full Text OpenURL
  23. Ministry of Industry and Information Technology: Comprehensive plan for the prevention of heavy metal pollution from the battery industry. China: Draft plan; 2010. OpenURL
  24. Occupational Knowledge International, Global Village Beijing, Institute of Public and Environmental Affairs: Health and environmental impacts from lead battery manufacturing and recycling in China. San Francisco, CA: OK International; 2011. OpenURL
  25. Wang JZ, Cao GQ, Zhang R: Lead-acid battery development and environmental impact.
    China Metal Bulletin 2012, 21:16-21. OpenURL
  26. China Environment Forum: Lead batteries: re-charging China’s e-waste disposal. China: A China Environmental Health Project Research Brief; 2008. OpenURL
  27. Yao LC, Zhang BG: Lead-acid battery industry will enter a rapid development track.
    China Bicycle 2011, 1:56-57. OpenURL
  28. Ji S, Cherry C, Bechle M, Wu Y, Marshall JD: Electric vehicles in China: emissions and health impacts.
    Environ Sci Technol 2012, 46:2018-2024. PubMed Abstract | Publisher Full Text OpenURL
  29. Annual sales of electric bicycles will surpass 47 million by 2018.
    OpenURL
  30. Weinert J, Ma C, Cherry C: The transition to electric bikes in China: history and key reasons for rapid growth.
    Transportation 2007, 34:301-318. Publisher Full Text OpenURL
  31. Cherry C, Weinert J, Ma C: Comparative environmental impacts of electric bikes in China.
    Transp Res Part D 2009, 14:281-290. Publisher Full Text OpenURL
  32. 2010年世界汽车产量前十位国家排名
    (The ranking of the top ten countries of world automobile production in 2010)
    OpenURL
  33. Number of cars in China hits 100m.
    OpenURL
  34. Hao H, Wang H, Yi R: Hybrid modeling of China’s vehicle ownership and projection through 2050.
    Energy 2011, 36:1351-1361. Publisher Full Text OpenURL
  35. Huo H, Wang M, Johnson L, He D: Projection of Chinese motor vehicle growth, oil demand, and CO2 emissions through 2050.
    Transp Res Rec: J Transp Res Board 2038, 2007:66-77. OpenURL
  36. Association EPI: Global market outlook for photovoltaics until 2015. Brussels, Belgium: EPIA; 2011. OpenURL
  37. International Energy Agency: China national photovoltaics status report 2012. China: Co-operative programme on photovoltaic power systems; 2012. OpenURL
  38. Chang Y, Mao X, Zhao Y, Feng S, Chen H, Finlowa D: Lead-acid battery use in the development of renewable energy systems in China.
    J Pow Sources 2009, 191:176-183. Publisher Full Text OpenURL
  39. Department of Energy: FY 2009 annual progress report for energy storage R&D. Washington DC: Department of Energy; 2010. OpenURL
  40. Gottesfeld P, Cherry CR: Lead emissions from solar photovoltaic energy systems in China and India.
    Energy Policy 2011, 39:4939-4946. Publisher Full Text OpenURL
  41. Mao JS, Cao J, Graedel TE: Losses to the environment from the multilevel cycle of anthropogenic lead.
    Environ Pollut 2009, 157:2670-2677. PubMed Abstract | Publisher Full Text OpenURL
  42. Mao J, Lu Z, Yang Z: The eco-efficiency of lead in China’s lead-acid battery system.
    J Ind Ecol 2006, 10:185-197. OpenURL
  43. Hoffmann U, Wilson B: Requirements for, and benefits of, environmentally sound and economically viable management of battery recycling in the Philippines in the wake of Basel Convention trade restrictions.
    J Pow Sources 2000, 88:115-123. Publisher Full Text OpenURL
  44. 各地公布铅蓄电池行业企业名单
    (Public announcement listing lead-acid battery industry enterprises)
    OpenURL
  45. Electric machines and apparatuses manufacturing- yearly industrial data (2003- ) from China’s statistical yearbooks.
    OpenURL
  46. U.S. Geological Survey: U.S. geological survey minerals yearbook- 2009. Reston, Virginia: USGS; 2011. OpenURL
  47. Wang S, Zhang J: Blood lead levels in children, China.
    Environ Res 2006, 101:412-418. PubMed Abstract | Publisher Full Text OpenURL
  48. United Nations Economic and Social Commission for Asia and the Pacific: Statistical Yearbook for Asia and the Pacific 2011. Thailand: United Nations Publication; 2011. OpenURL
  49. Ye X, Wong O: Lead exposure, lead poisoning, and lead regulatory standards in China, 1990–2005.
    Regul Toxicol Pharmacol 2006, 46:157-162. PubMed Abstract | Publisher Full Text OpenURL
  50. Falk H: International environmental health for the pediatrician: case study of lead poisoning.
    Pediatrics 2003, 112:259-264. PubMed Abstract | Publisher Full Text OpenURL
  51. Gottesfeld P, Pokhrel A: Review: lead exposure in battery manufacturing and recycling in developing countries and among children in nearby communities.
    J Occup Environ Hyg 2011, 8:520-532. PubMed Abstract | Publisher Full Text OpenURL
  52. Occupational Knowledge International: Summary of mass lead poisoning incidents. San Francisco, CA: OK International; 2012. OpenURL
  53. 关于加强铅蓄电池及再生铅行业污染防治工作的通知
    (Strengthening pollution prevention and control of lead-acid batteries and secondary lead industry)
    OpenURL
  54. 铅蓄电池行业准入条件
    (Lead battery industry access conditions)
    OpenURL
  55. Clark CS, Rampal KG, Thuppil V, Roda SM, Succop P, Menrath W, Chen CK, Adebamowo EO, Agbede OA, Sridhar MKC, Adebamowo CA, Zakaria Y, El-Safty A, Shinde RM, Yu J:Lead levels in new enamel household paints from Asia, Africa and South America.
    Environ Res 2009, 109:930-936. PubMed Abstract | Publisher Full Text OpenURL
  56. Ewers L, Clark CS, Peng H, Roda SM, Menrath B, Lind C, Succop P: Lead levels in new residential enamel paints in Taipei, Taiwan and comparison with those in mainland China.
    Environ Res 2011, 111:757-760. PubMed Abstract | Publisher Full Text OpenURL
  57. Schmidt C: Face to face with toy safety: understanding an unexpected threat.
    Environ Health Perspect 2008, 116:71-76. OpenURL